Maschine Mk1 Controller Help!!
- Thread starter Bugsy
- Start date
thedreampolice
A backwards poet writes inverse.
All maschine software versions work with mk1
I think i have officially found the problem with the controller, im not really sure though but it seems that it has something to do with my usb hub/ports.
my usb ports are 3.0, after a couple of research most people have the same problem with 3.0 usb ports.
it seems that maschine hardware perfectly works with 2.0.
native instruments got back to me, and made me run a test to see what could be causing the problem.
and this was last week,
so i continued with my research as i am still itching to use this.
just today, i was installing an m-audio axiom 25 and hit the same wall.
"Windows encountered a problem while installing your device"
tried installing the control device on my old laptop i used to mess around with, both the maschine and m-audio works fine on 2.0 ports.
now im trying to search for a usb hub that can convert 3.0 to 2.0 either that or i got a bunch of controllers that i wont be able to use.
or maybe if you guys encountered the same problem too? please help. ive been idle for half a month now trying to figure this out.
i also tried this,
http://www.cnczone.com/forums/gener...ms-software-driver-can-found-windows-can.html
didnt change a thing...hopefully it does help some who currently have the same issue, but it does nothing for me
my usb ports are 3.0, after a couple of research most people have the same problem with 3.0 usb ports.
it seems that maschine hardware perfectly works with 2.0.
native instruments got back to me, and made me run a test to see what could be causing the problem.
and this was last week,
so i continued with my research as i am still itching to use this.
just today, i was installing an m-audio axiom 25 and hit the same wall.
"Windows encountered a problem while installing your device"
tried installing the control device on my old laptop i used to mess around with, both the maschine and m-audio works fine on 2.0 ports.
now im trying to search for a usb hub that can convert 3.0 to 2.0 either that or i got a bunch of controllers that i wont be able to use.
or maybe if you guys encountered the same problem too? please help. ive been idle for half a month now trying to figure this out.
i also tried this,
http://www.cnczone.com/forums/gener...ms-software-driver-can-found-windows-can.html
didnt change a thing...hopefully it does help some who currently have the same issue, but it does nothing for me
thedreampolice
A backwards poet writes inverse.
The adapter won't work, what kind of computer is it? Can you find newer drivers for the actual USB ports? In theory 3.0 ports should work fine.
really? tsk, this is turning into a horrible nightmare..
its an HP Pavillion dv6-6011 TU, i could download a couple of drivers but not sure which one will help or will help for the matter.
m-audio doesnt work on 3.0's im not sure if its just the axioms tho.
maschine has a lot of problems plugged in a 3.0, at least from what ive found from the internet...
F!*#$(%&#@$(%&@P(#$&%@
its an HP Pavillion dv6-6011 TU, i could download a couple of drivers but not sure which one will help or will help for the matter.
m-audio doesnt work on 3.0's im not sure if its just the axioms tho.
maschine has a lot of problems plugged in a 3.0, at least from what ive found from the internet...
F!*#$(%&#@$(%&@P(#$&%@
@Fade
I guess its just maschine that has a problem with 3.0's
I used to use an Akai MPD 26 and a Novation Remote 61SL through this ports and havent had a problem...
any more ideas on how i could convert 3.0's to 2.0? aside from taking it apart?
was thinking of looking for usb hubs that could do the trick? but @thedreampolice said its a no go?
I guess its just maschine that has a problem with 3.0's
I used to use an Akai MPD 26 and a Novation Remote 61SL through this ports and havent had a problem...
any more ideas on how i could convert 3.0's to 2.0? aside from taking it apart?
was thinking of looking for usb hubs that could do the trick? but @thedreampolice said its a no go?
thedreampolice
A backwards poet writes inverse.
yea the USB 3.0 should be able to use a 2.0 device fine. The problem with a USB 2.0 hub is that you are still plugging it in to a 3.0 port so you have not solved your problem at all. I assume you are on 64bit windows? and have you tried this driver
http://h10025.www1.hp.com/ewfrf/wc/...dlc=en&lc=en&os=4063&product=5079560&sw_lang=
you should probably try these as well depending on what you have
http://h10025.www1.hp.com/ewfrf/wc/...dlc=en&lc=en&os=4063&product=5079560&sw_lang=
http://h10025.www1.hp.com/ewfrf/wc/...dlc=en&lc=en&os=4063&product=5079560&sw_lang=
and update the chipset driver
http://h10025.www1.hp.com/ewfrf/wc/...dlc=en&lc=en&os=4063&product=5079560&sw_lang=
Also maybe you could check the BIOS and see if you can turn USB 3.0 off and force them down to 2.0 But the idea behind USB 3 is that is is backward compatible with 2.0 devices, so it should work
but if all this doesnt work it sounds like you may actually have a problem with your USB controllers and then you are just screwed and will probably need a new laptop, how old is it? Its not under warranty is it? Can you plugin a USB mouse and test?
http://h10025.www1.hp.com/ewfrf/wc/...dlc=en&lc=en&os=4063&product=5079560&sw_lang=
you should probably try these as well depending on what you have
http://h10025.www1.hp.com/ewfrf/wc/...dlc=en&lc=en&os=4063&product=5079560&sw_lang=
http://h10025.www1.hp.com/ewfrf/wc/...dlc=en&lc=en&os=4063&product=5079560&sw_lang=
and update the chipset driver
http://h10025.www1.hp.com/ewfrf/wc/...dlc=en&lc=en&os=4063&product=5079560&sw_lang=
Also maybe you could check the BIOS and see if you can turn USB 3.0 off and force them down to 2.0 But the idea behind USB 3 is that is is backward compatible with 2.0 devices, so it should work
but if all this doesnt work it sounds like you may actually have a problem with your USB controllers and then you are just screwed and will probably need a new laptop, how old is it? Its not under warranty is it? Can you plugin a USB mouse and test?
Last edited:
Fade
The Beat Strangler
Administrator
illest o.g.
I mean if you have a desktop, then get this: http://www.newegg.com/Product/Product.aspx?Item=N82E16815166014
It's 2.0 so you would have nothing to do with 3.0.
It's 2.0 so you would have nothing to do with 3.0.
Thanks! but I have done all of this before coming to the forums...
Found a solution though, here it is,
http://www.cnczone.com/forums/gener...ms-software-driver-can-found-windows-can.html
just follow the steps if you guys had any trouble like mine.
thedreampolice
A backwards poet writes inverse.
Ahh so windows wasn't loading new drivers anyway. What a strange gremlin. Glad you figured it out! How's maschine working for you?
NI got back to me about my recent problems and this is what they have to say about it...
Thanks for your email.
It's highly plausible that the driver doesn't connect your Maschine Mk I properly
since it is not easy to write a standard driver for USB 3.0 ports especially on PC
due to the fact that they vary in manufacturers & therefore can have different
protocols.
However please try the following:
- Disconnect any USB devices you don't need in conjuction with your Maschine Mk I
controller,
- go to your device manager under "Sound-, Video & Gamecontrollers" & disable
further devices not needed.
- Connect your Maschine Controller directly to a working port on your computer
using the supplied cable.
- Eventually try further cable & ports.
- Last but not least, please try the controller using a powered USB hub.
just thought it might be of additional help.
Thanks for your email.
It's highly plausible that the driver doesn't connect your Maschine Mk I properly
since it is not easy to write a standard driver for USB 3.0 ports especially on PC
due to the fact that they vary in manufacturers & therefore can have different
protocols.
However please try the following:
- Disconnect any USB devices you don't need in conjuction with your Maschine Mk I
controller,
- go to your device manager under "Sound-, Video & Gamecontrollers" & disable
further devices not needed.
- Connect your Maschine Controller directly to a working port on your computer
using the supplied cable.
- Eventually try further cable & ports.
- Last but not least, please try the controller using a powered USB hub.
just thought it might be of additional help.