Dj Swivel
djswivel said:
how do you use the vocoder in reason?? im too lazt to read the manual lol
for me when i attach it to a nn-xt or whatever, the ony thing that wor on the vocoder is the EQ.....but when you got the vocoder selected, it doesnt make any sound....i dont get it
It's really simple, and the manual don't tell you shit. Definitly one of the worst manuals I've ever had for a peice of software.. Any way here's the run down>>
1) Open up a new track: Mixer, NN19,NNXT and the Vocoder.
2) Load a sample in to the NN19, something with just words in it,A Hook, speech.etc..
3) Next Load up the NNXT with some Guitar or Strings, I like the BIG STRINGS.
4) Now make sure you Vocoder is set to VOCODER not EQUALIZER.
5) Hit TAB to flip the rack around, here's the wiring>
a) Disconect the Right Output From the NN19, and connect the left output into the modulator on the back of the vocoder (has a Little Microphone Symbol).
b) Now disconnect the right and left outputs from the NNXT (1/L and 2/R), now reconnect them into the CARRIER INPUT on the back of the VOCODER (has a Little Keyboad Symbol).
6) Flip the rack back around and press play, you will now see the Modulation levels moving.
7) Just hit any key on you keyboard to here the vocoder, the sound changes with every key you hit. (Not your Computer Keyboard, Your Reason Keyboard).
8) If you still don't have any sound, check to see is you Vocoder is wired in to the mixer, check you mixer volume, if that don't work retrace your steps....
(Bonus) Try switching you band settings on the vocoder, for better results use 32 Band.
There You have it. I don't use it personally but I was messing around with the wiring one day and figured this out. Pretty simple, they have all the little pictures on the back of the rack to guide you. Plus knowing how to read a wiring diagram could also help.
Good Luck. I can't explain it any simpler than that.
X-RAY
"aka"
Jewel Avenue OX