Traktor scratch 2 pro set up

[Kaleidon]

Hi i need help with my setup

i got the audio 10 hooked up with my technics but I don't have anything going into the phono port

how do i get it like traktor scratch pro 1 where you flip the switch to switch between vinyl and timecode?

 

[Fade]

How do you have everything hooked up?

 

[Kaleidon]

How do you have everything hooked up?

I hook up the rca from the out on the audio 10 to the cd inputs of my mixer and the output on my turntables to the input of the audio 10

 

[Fade]

Well it should be turntable Out to audio10 In, which is what you have. I guess the problem is Out of the audio10 to the In of your mixer. What mixer? Do you mean your DJ mixer? Because with that picture above, it should just be your audio10 to your computer with the USB connection.

 

[mono]

I hook up the rca from the out on the audio 10 to the cd inputs of my mixer and the output on my turntables to the input of the audio 10

right. for switching traktor from timecode to analog mixing, open the control panel > channel setup, and put a checkmark next to "direct thru" of the corresponding channel. it is in the audio 10 manual though...

 

[Kaleidon]

for fade's question its a dj mixer


and for your question: How do i switch time code to analog mixing on mac? i have the mac version of traktor scratch

right. for switching traktor from timecode to analog mixing, open the control panel > channel setup, and put a checkmark next to "direct thru" of the corresponding channel. it is in the audio 10 manual though...

 

[mono]

same way. Applications > Native Instruments > TRAKTOR AUDIO 10 Driver > TRAKTOR AUDIO 10 Control Panel