Opening and cleaning Maschine internals..

[spectralight]

Hey..

Got a video I did ages ago about cleaning Maschine encoders after mine were jumping all over the place - sometimes without even being touched..

So if you want to do some general maintenance or you have a misbehaving Maschine, maybe give this a shot before moving it on.

Hope there's some value to it, not much that can go wrong, just be careful - don't scratch the PCB and use the rule of thumb that "you should never need force when putting something back on" and you should be good.



Enjoy!

 

[Fade]

Good video! My MK1 was doing that a lot and it was really annoying. I managed to get a replacement but I didn't bother to clean anything (since I got the replacement). It sucks that this happens though but I guess it's inevitable with all the dirt flying in there every day.

Oh ya, for videos, just paste the link in your post. No need to make a link. It will automatically embed it in your post.

 

[spectralight]

Oh cool.. Thanks for that @Fade.

Yeah it was really doing my head in at the time, go to make a beat but can't cause shits jumping all over the place and pretty much having to punch some of the buttons to get a response. ;p

Yea a lot of gunk gets caught in the grease that the knobs have on them naturally.

Could have rolled a joint from all the crumbs under the pads bahahaha!

 

[Fade]

Have the knobs jumped around since then? Because I remember NI's techs had me trying all sorts of things but nothing worked. Most of it was software stuff though.

 

[Drago Zetić]

Isopropyl alcohol is much better suited for cleaning electronics, but it's nice to see that denaturated also works.

 

[spectralight]

Have the knobs jumped around since then? Because I remember NI's techs had me trying all sorts of things but nothing worked. Most of it was software stuff though.

Surprisingly no @Fade. I still have minor issues with mute and solo buttons though not long after cleaning, nowhere near as bad as before though - seems to also be the angle that I place pressure on the solo or mute pad that affects this.

Heh. I was beta testing for a bit for NI Maschine, I wonder, maybe they could employ me to fix their faulty units too lol..

 

[spectralight]

Isopropyl alcohol is much better suited for cleaning electronics, but it's nice to see that denaturated also works.

Yes absolutely @Drago Zetić was all I had at the time.

I have cleaned it again since, and now use "Fast Drying Contact Cleaner" especially for electronics - sprayed the fuck out of the PCB, just doused it, was literally holding it from a corner waiting for the cleaner to either evaporate or drip off. Only because I didn't have one of those straw nozzle things to focus the spray.

But yeah I'd recommend that "Fast Drying Contact Cleaner".

 

[spectralight]

Also on this topic, when hitting the knobs - the cleaner will strip the grease and gunk out..

Some lubrication is required for longevity (as she said).

I think the spray I used just recently has a light lubrication mixed in, something to think about also..