My Midi controller isn't working for any program, anymore.
- Thread starter Sucio
- Start date
-
warzone round 3 voting begins in...
Running xp pro..
Got a m-audio keystudio 49.. USB powered...it was working fine yesterday...came with a disc....I'll try to use the disk has a music creation program inside.......see if that works...if not...any other suggestions?
What really blows is that I came up with a melody in my head today..and now I can't play it out...and wound up forgetting it..lol..
Got a m-audio keystudio 49.. USB powered...it was working fine yesterday...came with a disc....I'll try to use the disk has a music creation program inside.......see if that works...if not...any other suggestions?
What really blows is that I came up with a melody in my head today..and now I can't play it out...and wound up forgetting it..lol..
Go to add hardware on your computer and see if u see the drivers for your controller. If u see them uninstall them. Then go here http://www.m-audio.com/index.php?do...D=3b171c6a3ad63d9dfc5b44f794cfeab2&OS=72#tabs, select the the options that apply to you and download and install the updated drivers.
Some way or another your drivers got deleted or became corrupt. It's a good idea to uninstall and reinstall them from M-Audio's website from time to time anyway.
Some way or another your drivers got deleted or became corrupt. It's a good idea to uninstall and reinstall them from M-Audio's website from time to time anyway.
If u go to Control panel/Device Manager then Universal Serial Bus Controllers do u see exclamation marks beside your USB Root Hubs or anything else under that tab?
L beat me to it, i was gonna advise to do the same thing.
You will also be able to view the name of the damaged driver there as well in order to search for the correct one to download online, however your bootdisc that came with your computer should have all these support files.
You will also be able to view the name of the damaged driver there as well in order to search for the correct one to download online, however your bootdisc that came with your computer should have all these support files.
Power down computer and disconnect anything you have connected by way of usb. Power it back up and then look where I told u 2 look and see what's there now. The question mark is most likely not a problem. It's the exclamation marks that usually show somethings wrong. The question mark could be something u disconnected improperly and then plugged back in. In that case the drivers didn't reset and that device is not working properly.
Once again, down load and install the drivers from the site with no usb devices plugged in. Once the driver for you keystudio are installed plug the keystudio in a diff't usb.....not the one that you usually plug it into.
See if that solves it.
Once again, down load and install the drivers from the site with no usb devices plugged in. Once the driver for you keystudio are installed plug the keystudio in a diff't usb.....not the one that you usually plug it into.
See if that solves it.
Are any devices being recognized thru any of the other usb connections i.e external hard drive etc etc?
Da IllFellaz
Knee Deep In Da Beats
ur PC is sucio......